Dream Petite Loudspeaker
The Dream Petite loudspeaker cables
is a smaller (1/2 size) version of our are our
best-to-date DREAM speaker cables. It took over
two years to develop the full Dream speaker cables, and then
over a year to have the Dream Petite. Many prototypes have been made, and
we listened to them extensively, but
none of the earlier prototypes made it into beta testing -
because none of them sounded sufficiently better than the Hybrid MLT...
As well as the
full Dream, this one does.
The Dream stereo set consists of
two round cables - which are 25 mm (1 inch) in
diameter. The cables split at the ends into positive and negative
A simplified cross-section is shown
The outer layer
of the Dream Petite cable is made of 6 wire assemblies and 2 spacers
assembly is 6.35 mm (1/4 inch) in diameter, made of 8 individually insulated
solid core wires in our proprietary non-resonant distributed LITZ
configuration; two different thicknesses (gauges) of 99.999%
pure solid core copper, and two different gauges of 99.997%
pure solid core silver are used - per each wire
assemblies are wrapped around a
hollow, flexible para-vacuum* center multi-core (flexible
assemblies being run side-by-side create wire bundles (triple
runs). Therefore, there are two wire bundles (triple runs) in
each Dream Petite cable.
The two wire
bundles (triple runs) are separated by two soft (foam) Teflon dividing runs (spacers).
The spacers have
the dame diameter as the wire assemblies, i.e. 6.35 mm (1/4 inch).
Using dividers dramatically reduces the overall cable capacitance
and thus assures stability (non-oscillation) of any amplifier.
Suggested retail price is $5,500 for a 2 meter pair, and $2,200
for each consecutive meter.
(1.5 and shorter pair of Dream Petite speaker cables is
bi-wiring adds $800 regardless of the length;
para-vacuum tube is a hermetically sealed flexible tube filled
with Helium; fist, Helium is approximately 15 times lighter than
air, and therefore its energy storage properties are extremely
good: about equal to that of a 15-fold vacuum; the dielectric
properties of such environment are even better: Helium is inert
and has no ozone or other ionized molecules, and therefore there
are absolutely no leaks of any kind - and this is better than
any realistic vacuum. In addition, being surrounded by Helium,
the wires will never oxidize or deteriorate. And the last - but
not least, sine - unlike any vacuum - the Helium pressure is
exactly the same as the atmospheric air pressure, there is
nothing to force our Helium to leak, plus the tubes remain
flexible, and the Dream cables are user-friendly - unlike all
other "vacuum" cables (which are very stiff and inevitably lose
vacuum with time - i.e. unlike the Dream, need periodical
service to maintain the performance).